- Three Times Faster than Conventional Nd:YAG Laser Welders
- High Brightness Cavity Design
- Small Spot Diameter, High Power Density
LW300AH’s high-brightness design achieves significant increases in laser welding speed, and deeper penetration in laser weldable aluminum alloys: deep penetration, crack-free welds are possible using this innovative industrial laser design with weld speeds up to 3 times faster than conventional laser welding methods.
Specifications :
|
LW300AH |
Resonator Configuration |
High brightness optics |
Wavelength |
1064nm |
Average Power |
300W |
Pulse Energy @ 4mS |
20J |
Peak Power @ 4mS |
5kW |
Pulse Width Range |
0.25 to 99.9 mS |
Repetition Rate |
500Hz |
Pulse Shaping Feature |
Yes |
Aiming Laser |
Diode |
Number of Outputs |
Up to 4 |
Energy Share Outputs |
One group of up to 4, or two groups of 2 |
Time Share Outputs |
Up to 4 |
Datacom |
8/7 data, 2/1 stop bits, even/odd parity, RS485/422 |
Power Requirements |
220VAC +10%/-15%, 3 Phase, 50/60Hz |
A.C. Service |
50A |
Cooling Method |
Water-Water |
External Cooling Water Requirements |
2.6 gal./min. (10 liters/min) @81°F (27°C) |
Cooling Water Inlet Diameter |
0.591 inch (15mm) |
Ambient Operating Temperature |
40 - 95°F (5 - 35°C) |
Humidity |
85% non-condensing @ 77°F (25°C) |
Physical Dimensions H x W x D Inches (mm) |
46.1 x 20.9 x 53.1 (1170 x 530 x 1350) |
Weight lbs. (Kg) |
882 (400) |
Special Features |
CE certified units available: please consult factory |
BTU/Hr @ 100% Duty Cycle (Minimum Req.) (tons of cooling) |
40,300 (3.4) |