- 可調整的壓力點火功能
- 低慣性設計
- 氣動選項
- 可調整的皮重彈簧
- 單個空氣調節器
- 沖程可達1.5英吋（38毫米）
- 上、下止動器
- 耐用型設計
- EZ-AIR技術
Miyachi Unitek研製的用於點焊應用的Thin-Line焊頭包括三個系列的全能型精確金屬焊接產品：20磅（89N）至40磅（178N)）的80系列以及100磅（445N）的180系列。 所有產品均採用精確型、低慣性、壓力點火設計，並具有細長的垂直外形。 提供嵌入式和平行間隙點焊配置。 Thinline焊頭適用於生產線和台式應用，可以高於每小時3600次焊接的速度作業。
Specification :
|
FEATURE |
UNIT OF MEASURE |
||||||||
|
Model |
|
80F1 |
80A/EZ |
86F2* |
86A/EZ* |
87F1 |
87A/EZ |
88F |
88A/EZ |
|
Actuation |
|
Manual |
Air |
Manual |
Air |
Manual |
Air |
Manual |
Air |
|
Weld Force |
Maximum lbs (N) |
20 (89) |
20 (89) |
20 (89) |
20 (89) |
20 (89) |
20 (89) |
20 (89) |
20 (89) |
|
Minimum lbs (N) |
.25 (1.1) |
.5 (2.2) |
.25 (1.1) |
.5 (2.2) |
.25 (1.1) |
.5 (2.2) |
.5 (2.2) |
.5 (2.2) |
|
|
Maximum Rating |
KVA (Watt-Seconds) |
2 (250) |
2 (250) |
1 (125) |
1 (125) |
2 (125) |
2 (125) |
5 (250) |
5 (250) |
|
Maximum Electrode Stroke |
Inch (mm) |
1 (25) |
1 (25) |
1 (25) |
1 (25) |
1 (25) |
1 (25) |
1 (25) |
1 (25) |
|
Electrode Diameter |
Inch (mm) |
.125 (3.2) |
.125 (3.2) |
Unibond |
Unibond |
Thermodes |
Thermodes |
0.245 (6.2) |
0.245 (6.2) |
|
Electrode Configuration |
|
Opposed |
Opposed |
Parallel Gap |
Parallel Gap |
Parallel Gap |
N/A |
Series |
Series |
|
Electrode Holder Type |
|
Offset |
Offset |
Offset |
Offset |
Offset |
Offset |
Offset |
Offset |
|
Maximum Throat Size (H x D) |
Inch |
1.94 x 6.0 |
1.94 x 6.0 |
3.38 x 5.19 |
3.38 x 5.19 |
2.55 x 5.25 |
2.55 x 5.25 |
6.2 x 6.25 |
6.2 x 6.25 |
|
(mm) |
(49 x 152) |
(49 x 152) |
(86 x 132) |
(86 x 132) |
(65 x 133) |
(65 x 133) |
(157 x 159) |
(157 x 159) |
|
|
Maximum Gap between Electrodes |
Inch |
- |
- |
0.040 |
0.040 |
0.040 |
0.040 |
1.75 |
1.75 |
|
(mm) |
- |
- |
(1.0) |
(1.0) |
(1.0) |
(1.0) |
(44.5) |
(44.5) |
|
|
Electrode Series |
|
ES-0400 |
ES-0400 |
EU or UT |
EU |
174 orUT |
174 |
ES-0800E |
ES-0800E |
|
Foot Pedal Model |
|
CP |
- |
CP |
- |
CP |
- |
MSP |
- |
|
Footswitch Model |
- |
- |
FS1L, |
- |
FS1L |
- |
FS1L |
- |
FS1L |
|
Air Solenoid Voltage |
VAC |
- |
24 |
- |
24 |
- |
24 |
- |
24 |
|
Air Pressure for Maximum |
Force psig (bar) |
- |
65 (4.5) |
- |
65 (4.5) |
- |
65 (4.5) |
- |
65 (4.5) |
|
Air Cylinder Inside Diameter |
Inch (mm) |
- |
.75 (19) |
- |
.75 (19) |
- |
.75 (19) |
- |
.75 (19) |
|
Cycle Rate: @ Minimum Force |
Full Strokes/sec |
- |
1 |
- |
1 |
- |
1 |
- |
1 |
|
@> 20% of Rated Force |
Full Strokes/sec |
- |
2.5 |
- |
2.5 |
- |
2.5 |
- |
2.5 |
|
Maximum Dimensions (including stand & Air Kit) |
Height - Inch (mm) |
13.7 P48) |
15.9 (404) |
16 (406) |
16.5 (419) |
16 (406) |
16.5 (419) |
16.7 (424) |
19.3 (490) |
|
Depth - Inch (mm) |
6.93 (176) |
13.8 (350) |
6.6 (168) |
13.8 (350) |
7.0 (178) |
13.8 (350) |
13.5 (343) |
15.6 (396) |
|
|
Width - Inch (mm) |
1.8 (46) |
3.5 (89) |
2.2 (56) |
3.5 (89) |
2.2 (56) |
3.5 (89 |
4 (102) |
5.6 (142) |
|
|
Weight (before packing) |
Lbs (kg) |
5 (2.3) |
7 (3.2) |
5.5 (2.5) |
7 (3.2) |
5.5 (2.5) |
7 (3.2) |
14 (6.4) |
17 (7.7) |
(1) Model 80FLF and 87FLF have a force range of 0.25 - 10 lbs (1.1 - 44.5N).
(2) Model 86FRE and 86ARE use 1/8 inch (3.2mm) diameter Series E0-0400 35° Offset Electrode Holders and Electrodes.
(3) See page 7 for EZ-AIR specifications.
(4) 17BM, 17F, 17M, 17P or 17SR
*A UTA to mount Unitips is needed on the 86 weld heads