- 閉環式溫度與時間控制
- 可存儲15個加熱曲線
- 可通過RS-232/485進行遠程設置
- 用於加工控制和輔助監控的兩隻熱電偶
- 全面而信息豐富的用戶界面
- 可在配搭內置變壓器的標準設備及配搭小型控制單元和獨立遠程變壓器的遠程設備之間選擇
全新的Uniflow 4可針對柔性電路、帶狀電纜、電線、SMT元件、單層或雙層邊緣連接器的焊接以及金質帶狀連接器的熱壓幫定提供定向加熱與精確溫度控制。
這款新機型進行了重大更新,在多個方面升級了硬件,並加入了加工控制功能和豐富靈活的選項。
新款Uniflow4電源可以配搭內置變壓器的標準設備形式提供,也可以配搭小型控制單元和獨立遠程變壓器的遠程設備形式提供(Uniflow4R),其中後者是多種自動化安裝的理想選擇。
SPECIFICATIONS :
Temperature Profile Specifications |
|
Temperature Range |
25 to 300°C |
Time Periods (in0.1Sec.Increments) |
0 to 99.9 seconds |
Temperature Control |
±2% of reading or ±6°C, whichever is greater |
ThermocoupleInput |
Type E, J or K |
HeatingRateControl
|
Three integrated user-set parameters optimize |
ProgrammableHeatprofiles |
Fifteen (15) non-volatile memory |
Switched Input Electrical Specifications |
|
OperatorInitiation |
1 or 2 level footswitch |
DedicatedRelays |
24 VAC/24 VDC 0.3A |
ProgrammableRelays |
7 each, electromechanical (24VAC or +24DC) |
CommunicationPorts |
RS-232, RS-485 |
ProgrammableRelay
|
Reflow, preheat, baseheat, idle on, alarm, out of limits, clean thermode, replace thermode, end reflow, heat on, head valve active, system ready |
Physical/Environmental |
|
Dimensions
|
Uniflow 4: 12.6 x 10.0 x 18.33 (319 x 254 x 466) |
Operating Temperatures |
59°F (15° C) – 104°F (40°C) |
Weight Lbs. (kg)
|
Uniflow 4 2 kVA – 48 (21.8) Uniflow 4 4 kVA – 60 (27.2) |
Relative Humidity, Max. |
93% @ 104°F (40°C) |