- 150瓦平均功率
- 70焦脈衝能量與7千瓦峰值功率
- 四種能源共享或六種時間共享選項
- 200赫茲重複頻率
- 可設置32個焊接計劃
- 功率增加/減少功能
LW150A可為更快速的深度縫焊應用提供高達150瓦特的平均功率,並且脈衝持續時間可達99毫秒,可用於焊接容易開裂的合金。
Specifications :
Parameter |
LW50A, LW50AE4, LW50AC, LW50ACE4 |
LW70A, LW70AE4, LW70AC, LW70ACE4 |
LW150A, LW150AE |
|||
Maximum Average Power |
50 Watts |
70 Watts |
150 Watts |
|||
Maximum Pulse Energy |
50J1 |
70J1 |
70J1 |
|||
Maximum Peak Power |
5kW1 |
7kW1 |
7kW1 |
|||
Time Share Outputs |
Up to 6 |
|||||
Energy Outputs |
Up to 4 |
|||||
Pulse Width Range |
0.25 ^ 30mS |
0.25 ^ 100mS |
||||
Pulse Width Resolution |
0.05mS < 5mS and 0.1 mS > 5mS |
|||||
Oscillation Wavelength |
1.064µm |
|||||
Positioning Guide Beam |
Built-in visible laser (red) |
|||||
Output Stability |
±3%2 |
|||||
Repetition Speed |
1 - 200pps |
|||||
Input Voltage |
220VAC +10%/-15%, 50/60 Hz ±3%, 3Ø (non-CE)3 400VAC ±10%, 50/60 Hz ±3%, 3Ø (CE model)3 |
|||||
Recommended A.C. Service |
20A (220VAC) and 10A (400VAC) |
30A (220VAC) and 20A (400VAC) |
||||
Max. Power Consumption |
3.3kW |
5.7kW |
||||
Schedule Set |
32 schedules |
|||||
Start Delay Time Schedule Change Time |
0.1mS, 1mS, 4mS, 8mS, 16mS selectable |
|||||
Ambient Temperature |
41-86°F (5-35°C) |
|||||
Alarm for Lamp Life |
Preset number of shots or input power value to lamp |
|||||
RS-485: |
|
|||||
Cooling |
5-25°C inlet water temp. 294kPa max. pressure drop 1.0 ton cooling capacity |
Air cooled - no external water required |
5-25°C inlet water temp. 294kPA max. pressure drop 1.0 ton cooling capacity |
Air cooled - no external water required |
5-32°C inlet water temp. 294kPa max. pressure drop 1.5 ton cooling capacity |
|
Branch/Main Shutter Speed |
≤150mS |
|||||
Time Share Shutter Speed |
≤50mS |
|||||
Dust Proof Optics Path |
Yes |
Note 1: Pulse Width = 10mS
Note 2: Laser output energy at least 5J per pulse and 1kW peak power minimum
Note 3: For input voltages of 240, 380, 400V AC, an additional transformer must be factory installed (for all non-CE models).
Note 4: CE certified unit