- 高頻逆變器焊機直流技術
- 焊接電流、電壓或功率的高速反饋控制系統
- 圖形與字母數字式用戶界面
- 自動化集成的輸入/輸出通訊端口
- 可選配帶內置SPC的內置式Weld Sentry
The HF2 is a 2kHz, state-of-the-art DC inverter resistance welding control used to join small parts at high speed.
Model HF2S includes a built-in Weld Sentry for resistance weld monitoring with SPC capability.
High speed digital adaptive feedback controls weld current, voltage, or power, providing better weld consistency as compared to traditional AC or CD technologies.
Specification :
CONTROL SYSTEM |
2KHz Pulse Width Modulated (PWM) DC welding control with constant current, voltage or power feedback operating modes. Feedback response every 250 |
Line Voltage |
Three Phase Delta, 208, 230, 380 or 460 VAC ±13%, 50/60 Hz power source. |
Weld Current |
0.05 – 4.0 kA |
Weld Power |
0.10 – 9.99 kW |
Weld Voltage |
0.1 – 5.0V |
Weld Period |
2000 milliseconds (maximum) |
Graphical Weld Display |
Graphical display of programmed and actual weld current, voltage and power. |
Welding functions |
10 functions – basic, braze, dual pulse, pre/weld/post heat, pulsation, quench/temper, roll-spot, weld/repeat, up/down slope and seam, selectable by graphical or alpha-numeric user interface. |
Weld Schedules |
The user can save (write) 128 different weld schedules. Weld schedules 1 through 127 can be protected. Schedule O is designed to be used as a scratchpad for schedule development. |
INPUT SIGNALS |
|
Remote Control External Input connector |
Provides control for the following remote control signals: emergency stop, weld inhibit and remote weld schedule selection. Use dry relay contacts or optocouplers to control remote external input signals. |
Firing Switch |
1-level footswitch, 2-level footswitch, 2-wire firing switch, 3-wire firing switch and opto-firing switch. Use dry relay contact or opto-couplers to control input signals. |
OUTPUT SIGNALS |
|
Solid State Relays |
2 user programmable solid state relays: AC-24/115 VAC @ 15VA: DC-24 VDC @ 15VA. |
Valve Driver Outputs |
Two solid state relay outputs for controlling air actuated weld heads. Valve #1 can control a single 24/115 VAC air head. |
|
Valve #2 can control a single 24 VAC air head. |
PHYSICAL CHARACTERISTICS |
|
Dimensions – L x W x H Inches (mm) |
15 x 10.5 x 8.5 (381 x 267 x 216) |
Weight – Lbs (Kg) |
42 (19) |