光纖激光電焊機——100W

光纖激光電焊機——100W—500W

聚焦焊點可小至10微米
對鋼鐵的穿透深度超過0.06英吋
可對金屬進行高質量的精細切割
優異的功率穩定性
簡單、直觀的用戶界面

Miyachi Unitek從脈衝式Nd:YAG微型焊中吸取了大量經驗，現推出了LF系列 光纖激光機，該機型能夠提供精細切割、小型元件焊接和金屬深熔焊所需的精密控制。大型懸架式觸摸屏操縱台便於清楚查看流程計劃參數，直觀的用戶界面便於快速、輕鬆地進行設置。

160至1000瓦的光纖激光設備均提供單模和多模配置，可在脈衝或cw模式下操作，適用於生產要求各異的應用。

Specification :

Parameter	Laser
Maximum Output	100 Watts (LF100A) (M2 = 1.1) 160 Watts (LF160A) (M2 = multimode) 200 Watts (LF200A) (M2 = 1.1 or multimode) 300 Watts (LF300A) (M2= 1.1) 400 Watts (LF400A) (M2 = 1.1) 500 Watts (LF500A) (M2 = 1.1 or multimode)
Beam Quality	M2 = 1.1 or multimode
Pulse Width	0.02 – 99ms
Pulse Width Resolution	0.001ms
Repetition Frequency	1 – 50,000 Hz, CW
Oscillation Wavelength	1070nm
Positioning Guide Beam	Built-in visible laser (red)
Output Stability over Operating Temperature Range	±3%
Voltage	240 V +/- 10% V AC 50-60 Hz single phase
Current	25 A RMS
Cooling	Air cooling
Operating Temperature	41 – 104 F (5-40 °C)
Operating Humidity	5-85% RH (non condensing)
External Communication (RS232)	Baud Rate: variable 9600 – 115200 Start bits: 1 Data bits: 8 Parity: Even Stop bits: 1 Flow control: None

Physical character ist ics :

Size inches H x W x D	37 x 20.5 x 32.5 inches (939.8 x 520.7 x 825.5 mm)
Weight	300Ib (136.3 Kg)

. 2013 (c) Kooner Technology (H.K.) Co., Ltd..