- 速度比傳統的Nd:YAG激光焊機快3倍
- 高亮度腔體設計
- 焊點直徑小、功率密度高
LW300AH的高亮度設計極大地提高了在適合激光焊接的鋁合金上進行激光焊接的速度以及深熔焊的能力:使用這款創新型工業激光焊機可實現深熔、無裂紋的焊接效果,而且焊接速度比傳統激光焊接方式快3倍。
Specifications :
|
LW300AH |
Resonator Configuration |
High brightness optics |
Wavelength |
1064nm |
Average Power |
300W |
Pulse Energy @ 4mS |
20J |
Peak Power @ 4mS |
5kW |
Pulse Width Range |
0.25 to 99.9 mS |
Repetition Rate |
500Hz |
Pulse Shaping Feature |
Yes |
Aiming Laser |
Diode |
Number of Outputs |
Up to 4 |
Energy Share Outputs |
One group of up to 4, or two groups of 2 |
Time Share Outputs |
Up to 4 |
Datacom |
8/7 data, 2/1 stop bits, even/odd parity, RS485/422 |
Power Requirements |
220VAC +10%/-15%, 3 Phase, 50/60Hz |
A.C. Service |
50A |
Cooling Method |
Water-Water |
External Cooling Water Requirements |
2.6 gal./min. (10 liters/min) @81°F (27°C) |
Cooling Water Inlet Diameter |
0.591 inch (15mm) |
Ambient Operating Temperature |
40 - 95°F (5 - 35°C) |
Humidity |
85% non-condensing @ 77°F (25°C) |
Physical Dimensions H x W x D Inches (mm) |
46.1 x 20.9 x 53.1 (1170 x 530 x 1350) |
Weight lbs. (Kg) |
882 (400) |
Special Features |
CE certified units available: please consult factory |
BTU/Hr @ 100% Duty Cycle (Minimum Req.) (tons of cooling) |
40,300 (3.4) |